Introdução
This guide demonstrates how to replace the trigger/switch on the Crain 775 Jamb Saw.
O que você precisa
-
-
Use a Phillips #2 screwdriver to remove the eight screws securing the saw housing:
-
Four 20 mm screws
-
Two 50 mm screws
-
Two 55 mm screws
-
-
-
-
Use a Phillips #2 screwdriver to loosen the four screw terminals securing the power cord and motor wires.
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.