Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the two 3.2 mm PH000 screws near the charging port.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Pry the back cover from the device along bottom edge.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Continue prying along each edge of the device until back cover is free.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
On the back cover, find the location where the volume/power button is held.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the old button and replace it with the new one.
-