Introdução

If the volume/power control button on your Craig Electronics CMP773 tablet has quit working, this guide will demonstrate how to replace it with the correct tools. During this procedure, be especially careful not to let it fall out when snapping on and off the back cover.

Remove the two 3.2 mm PH000 screws near the charging port.
  • Remove the two 3.2 mm PH000 screws near the charging port.

Adicionar comentário

Pry the back cover from the device along bottom edge.
  • Pry the back cover from the device along bottom edge.

Adicionar comentário

Continue prying along each edge of the device until back cover is free.
  • Continue prying along each edge of the device until back cover is free.

Adicionar comentário

On the back cover, find the location where the volume/power button is held.
  • On the back cover, find the location where the volume/power button is held.

  • The volume/power button is not held securely after back is removed so it may fall out of place while removing the back cover from the device.

Adicionar comentário

Remove the old button and replace it with the new one. Remove the old button and replace it with the new one.
  • Remove the old button and replace it with the new one.

Adicionar comentário

Conclusão

Once the above steps have been successfully competed, power on the device. Enjoy your newly replaced volume/power control button.

Jessie L Morris

Member since: 26-03-2018

171 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S1-G5, Harley Spring 2018 Membro de IUPUI, Team S1-G5, Harley Spring 2018

IUPUI-HARLEY-S18S1G5

6 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 30