Craftsman Model 315.10721 Brush Replacement

Introdução

Often times it is only necessary to replace the carbon brushes, not the motor. Carbon brushes experience a lot of friction, and replacement is generally expected over time. Ensure your saw is unplugged before beginning the repair

O que você precisa

Passo 1 Brush

Craftsman Model 315.10721 Brush Replacement, Brush: passo 1, imagem 1 %32

Craftsman Model 315.10721 Brush Replacement, Brush: passo 1, imagem 2 %32

Using a flathead screwdriver, remove the brush caps on the outer casing of the saw near the motor.

Editar

Passo 2

Using a Phillips #00 screwdriver or a small diameter nail, carefully pull out the washer.
The washer is seurely held in place and may require force to remove

Editar

Passo 3

After the washers are removed, gently grab the old brushes and remove them from the motor.
When reassembling make sure the curvature of the brushes match curvature of the motor.

Editar