Introdução

This guide will show how to replace the barrel heating element. It requires the housing, power cord and motherboard to be removed beforehand.

  1. Remove the Philips #1 28 mm.
    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

    Adicionar comentário

  2. Remove the Philips #1 22 mm screws.
    • Remove the Philips #1 22 mm screws.

    Adicionar comentário

    • Pry off the housing using a plastic spudger.

    Adicionar comentário

    • Pull power chord out.

    Adicionar comentário

    • Heat up your soldering gun and desolder the red wire from the motherboard as shown.

    • Note the location of wire attachment.

    Adicionar comentário

    • With your soldering gun, desolder the white wire from the motherboard as shown.

    • Note the location of wire attachment.

    Adicionar comentário

    • Once both wires are desoldered the motherboard can be removed.

    Adicionar comentário

    • Remove the heating element mount. This will free up the heating element barrel for replacement.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jonathon Bruer

Member since: 09-11-2017

553 reputação

5 Guides authored

Equipe

IUPUI, Team S7-G5, Baechle Fall 2017 Membro de IUPUI, Team S7-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G5

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 20

Todo: 279