Ir para o conteúdo principal

Compaq Evo N1000v Top Cover Replacement

O que você precisa

  1. Compaq Evo N1000v Top Cover Replacement, LED Cover: passo 1, imagem 1 %32
    • Flip the laptop over with the rear panel facing forward.

  2. Compaq Evo N1000v Top Cover Replacement: passo 2, imagem 1 %32
    • Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.

  3. Compaq Evo N1000v Top Cover Replacement: passo 3, imagem 1 %32
    • Flip the laptop back over with the front facing forward. Open the screen.

  4. Compaq Evo N1000v Top Cover Replacement: passo 4, imagem 1 %32
    • Locate the F1 and F2 keys near the top left corner of the keyboard.

  5. Compaq Evo N1000v Top Cover Replacement: passo 5, imagem 1 %32
    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  6. Compaq Evo N1000v Top Cover Replacement: passo 6, imagem 1 %32
    • Locate the Scroll and Pause keys near the top right corner of the keyboard.

  7. Compaq Evo N1000v Top Cover Replacement: passo 7, imagem 1 %32
    • While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  8. Compaq Evo N1000v Top Cover Replacement: passo 8, imagem 1 %32 Compaq Evo N1000v Top Cover Replacement: passo 8, imagem 2 %32
    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

  9. Compaq Evo N1000v Top Cover Replacement, Keyboard: passo 9, imagem 1 %32
    • Lift the back edge of the keyboard and pull towards the screen.

  10. Compaq Evo N1000v Top Cover Replacement: passo 10, imagem 1 %32
    • Pull the cable and lift up to release.

  11. Compaq Evo N1000v Top Cover Replacement: passo 11, imagem 1 %32
    • Remove the keyboard.

  12. Compaq Evo N1000v Top Cover Replacement, Heat Sink: passo 12, imagem 1 %32
    • Disconnect the cable connecting the fan to the system board.

  13. Compaq Evo N1000v Top Cover Replacement: passo 13, imagem 1 %32
    • Remove the four screws from the heat sink.

  14. Compaq Evo N1000v Top Cover Replacement: passo 14, imagem 1 %32
    • Pull the the heat sink up and out of the computer.

  15. Compaq Evo N1000v Top Cover Replacement, Palm Rest: passo 15, imagem 1 %32
    • Close the laptop and flip it so the rear panel is facing up.

  16. Compaq Evo N1000v Top Cover Replacement: passo 16, imagem 1 %32
    • Using the TR8 Torx screwdriver, remove the six screws from the back case.

  17. Compaq Evo N1000v Top Cover Replacement: passo 17, imagem 1 %32
    • Remove the battery.

    • Remove the screw from the metal support on the case edge with a Torx T8 screwdriver.

    • Flip the laptop over again so the top is facing up.

    • Open the laptop screen and face it towards you.

  18. Compaq Evo N1000v Top Cover Replacement: passo 18, imagem 1 %32
    • Lift the the palm rest up from the front edge of the laptop and swing it towards the screen.

    • Be gentle as it is connected by some cables.

  19. Compaq Evo N1000v Top Cover Replacement: passo 20, imagem 1 %32
    • Disconnect the second ribbon cable.

  20. Compaq Evo N1000v Top Cover Replacement: passo 21, imagem 1 %32
    • Remove the palm rest.

  21. Compaq Evo N1000v Top Cover Replacement, Top Cover: passo 22, imagem 1 %32
    • Turn the laptop bottom side up.

  22. Compaq Evo N1000v Top Cover Replacement: passo 23, imagem 1 %32
    • Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

  23. Compaq Evo N1000v Top Cover Replacement: passo 24, imagem 1 %32
    • Turn the base top side up with the front facing forward.

  24. Compaq Evo N1000v Top Cover Replacement: passo 25, imagem 1 %32
    • Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

  25. Compaq Evo N1000v Top Cover Replacement: passo 26, imagem 1 %32
    • Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Disconnect the microphone cable from the system board.

  26. Compaq Evo N1000v Top Cover Replacement: passo 27, imagem 1 %32
    • Remove the top cover from the base.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Alex Hernandez

Membro desde: 04/14/10

46 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 29-74, Johann Spring 2010 Membro de Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

Membros da 3

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Duração total: 3,062