Pular para o conteúdo principal

Introdução

Disassembly guide for Cisco Aironet 1242ag Access Point

Ferramentas

Peças

Nenhum componente especificado.

  1. The equipment cover is held by 4 screws. The equipment cover is held by 4 screws.
    • The equipment cover is held by 4 screws.

  2. Once the 4 screws are removed, push to the side to remove the cover.
    • Once the 4 screws are removed, push to the side to remove the cover.

  3. PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora

    PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora
  4. The card is attached to the bottom plate by 4 screws Before removing the logic board, disconnect the antenna cables in both parts of the device. There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.
    • The card is attached to the bottom plate by 4 screws

    • Before removing the logic board, disconnect the antenna cables in both parts of the device.

    • There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.

  5. Write the wisdom here. Write the wisdom here. Write the wisdom here.
    • Write the wisdom here.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Um agradecimento especial a esses tradutores:

100%

Estes tradutores estão nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Documentos anexados

Eneider Colina

Membro desde: 20-09-2013

1.442 reputação

9 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 16

Todo: 308