Conserte seus objetos Junte-se à Comunidade Loja

Cingular 8125 Speakers Replacement

Introdução

Are your Cingular Speakers broken or have stopped working? Follow this guide to fix the issues and have functioning speakers again.

Tools

  • iFixit Opening Tool
  • 64 Bit Driver Kit

O que você precisa

    • Hold the phone with the back (camera side) facing you.

    • Press on the battery cover until it slides off.

    Editar

  2. Cingular 8125 Speakers Replacement: passo 2, imagem 1 %32

    • Lift up the black tab that sticks out on the battery's side until the battery is pulled out.

    • Using the iFixit Opening Tool, pull on the phone's camera cover until it pops off.

    Editar

  3. Cingular 8125 Speakers Replacement: passo 3, imagem 1 %32

    • Remove the four black Torx head screws in each corner.

    Editar

  5. Cingular 8125 Speakers Replacement: passo 4, imagem 1 %32

    • Pull on the back cover of the phone with the iFixit opening tool until the green motherboard is revealed.

    Editar

  6. Cingular 8125 Speakers Replacement: passo 5, imagem 1 %32

    • Remove the black plastic piece from the motherboard by gently pulling it off.

    • Align the white squares on the motherboard and the speakers.

    • You'll know they are lined up correctly when the speaker's wires face the motherboard's center.

    • Press down on the white squares until they snap together.

    Editar

  7. Cingular 8125 Speakers Replacement: passo 6, imagem 1 %32

    • Place the back cover of the phone over the motherboard.

    • Check to be sure the speaker's black piece is against the holes in the back cover.

    Editar

    • Screw the four Torx head screws with the 64 Bit Driver Handle to connect the back cover to the motherboard.

    • Press the camera cover down on the back cover until it snaps into place.

    Editar

    • Line up the copper terminal on the battery with the terminal on the phone, then press the battery back into place.

    • Make sure the black tab sticks out.

    • Slide the battery cover over the camera cover until it snaps back into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 6 outros contribuidores

Laura Kimberly Simonds

Membro desde: 09/24/12

301 Reputação

2 Guias de autoria

Emblemas: 3

Equipe

University of Maine, Team 1-1, Diaz Fall 2012 Membro de University of Maine, Team 1-1, Diaz Fall 2012

UMAINE-DIAZ-F12S1G1

4 Membros

2 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Duração total: 296