Ir para o conteúdo principal

Casdon Dyson Ball Disassembly

O que você precisa

  1. Casdon Dyson Ball Disassembly, Battery: passo 1, imagem 1 %32
    • Remove one 9.2mm (0.36 in) screw using the PH00 screwdriver.

    • Remove the battery cover by pulling it away from the vacuum once the 9.2mm (0.36 in) screw is removed.

  2. Casdon Dyson Ball Disassembly: passo 2, imagem 1 %32
    • Remove batteries from the vacuum by pulling them out and away from the vacuum.

  3. Casdon Dyson Ball Disassembly, Casdon Dyson Ball Disassembly: passo 3, imagem 1 %32
    • Remove all seven 9.2mm (0.32 in) screws on the back of the vacuum.

  4. Casdon Dyson Ball Disassembly: passo 4, imagem 1 %32
    • Remove the front side covers by pulling them away from the vacuum.

  5. Casdon Dyson Ball Disassembly: passo 5, imagem 1 %32
    • Separate the battery compartment from the ball and bead cylinder by sliding the vacuum ball away from the battery compartment.

  6. Casdon Dyson Ball Disassembly: passo 6, imagem 1 %32
    • Separate the bead cylinder and the fan compartment by pulling the bead cylinder away from the fan compartment.

  7. Casdon Dyson Ball Disassembly: passo 7, imagem 1 %32
    • Remove beads from the container.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Seldon Price

Membro desde: 11/07/17

612 Reputação

Autoria de 5 guias

Equipe

IUPUI, Team S3-G5, Harley Fall 2017 Membro de IUPUI, Team S3-G5, Harley Fall 2017

IUPUI-HARLEY-F17S3G5

Membros da 3

Autoria de 10 guias

2 comentários

How do I get the handle out once assembled?

Carie McClendon - Responder

The fan to make the beads jump around no longer works….is there. Separate battery for that?

Kathy - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 36

Últimos 30 dias: 156

Duração total: 12,054