Ir para o conteúdo principal

Capresso Perfectea 260 Motherboard Replacement

O que você precisa

  1. Capresso Perfectea 260 Motherboard Replacement, Motherboard: passo 1, imagem 1 %32
    • First, take the base of the device and flip it over.

  2. Capresso Perfectea 260 Motherboard Replacement: passo 2, imagem 1 %32 Capresso Perfectea 260 Motherboard Replacement: passo 2, imagem 2 %32
    • Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

  3. Capresso Perfectea 260 Motherboard Replacement: passo 3, imagem 1 %32
    • Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

  4. Capresso Perfectea 260 Motherboard Replacement: passo 4, imagem 1 %32
    • Unplug the wire going into the side of the motherboard

  5. Capresso Perfectea 260 Motherboard Replacement: passo 5, imagem 1 %32 Capresso Perfectea 260 Motherboard Replacement: passo 5, imagem 2 %32
    • Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.

    • Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.

    • Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

  6. Capresso Perfectea 260 Motherboard Replacement: passo 6, imagem 1 %32
    • Lift the motherboard out of the device

Conclusão

To reassemble your device, follow these instructions in reverse order.

Rohin Chander

Membro desde: 04/14/15

101 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 6-17, Maness Spring 2015 Membro de Cal Poly, Team 6-17, Maness Spring 2015

CPSU-MANESS-S15S6G17

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 2

Últimos 30 dias: 4

Duração total: 231