Conserte seus objetos Comunidade Loja

Canon Selphy CP1200 Motherboard Replacement

Introdução

This guide shows how to replace the motherboard of the Canon Selphy CP1200. This replacement may be done to replace a faulty motherboard in the event other components are working, and is a required step for replacing other components including the printing mechanism and cooling fan.

O que você precisa

  1. Canon Selphy CP1200 Motherboard Replacement, LCD/Buttons: passo 1, imagem 1 %32

    • Unscrew the four 6mm PH000 corner screws.

    • This will require a screwdriver with a long, narrow shaft.

    Editar

  2. Canon Selphy CP1200 Motherboard Replacement: passo 2, imagem 1 %32

    • Unscrew the three 4mm PH1 screws on the bottom of the printer.

    Editar

  3. Canon Selphy CP1200 Motherboard Replacement: passo 3, imagem 1 %32

    • Gently pry open the top of the case from either the front or back.

    • A plastic opening tool may help.

    • Be careful in lifting the top assembly as it is attached to the motherboard at this point.

    Editar

  5. Canon Selphy CP1200 Motherboard Replacement: passo 4, imagem 1 %32

    • Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.

    • Tweezers may be useful given the limited space between the top assembly and motherboard.

    • The top assembly, containing both the LCD and buttons, will now be completely free

    Editar

  6. Canon Selphy CP1200 Motherboard Replacement, Motherboard: passo 5, imagem 1 %32

    • Detach the fan cable from the motherboard.

    Editar

  7. Canon Selphy CP1200 Motherboard Replacement: passo 6, imagem 1 %32

    • Detach the ribbon cable leading to the DC in port and battery leads.

    • Tweezers may be useful.

    Editar

  8. Canon Selphy CP1200 Motherboard Replacement: passo 7, imagem 1 %32

    • Unscrew the three 3mm PH000 screws from the motherboard.

    Editar

  9. Canon Selphy CP1200 Motherboard Replacement: passo 8, imagem 1 %32

    • Disconnect the bundled cables leading to the printing mechanism.

    Editar

  10. Canon Selphy CP1200 Motherboard Replacement: passo 9, imagem 1 %32

    • Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.

    • Tweezers may be useful due to the limited amount of space.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 12

Duração total: 1,076