Conserte seus objetos Comunidade Loja

Canon Powershot SX500 IS Battery Replacement

Introdução

The user will need a replacement battery or fully charged battery to insert into the camera. No tools required.

  1. Canon Powershot SX500 IS Battery Replacement, Battery: passo 1, imagem 1 %32

    • Rotate the camera to expose the underside of the camera.

    Editar

  3. Canon Powershot SX500 IS Battery Replacement: passo 2, imagem 1 %32

    • Slide the rounded rectangle tab to the left to release the battery cover.

    Editar

  4. Canon Powershot SX500 IS Battery Replacement: passo 3, imagem 1 %32

    • Push the small orange tab forward to release the battery (Battery is ready for removal).

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

2 comentários

Simple & to the point. One would think manufacturers would hop on-board recruiting others like yourself.

Will check your site for other "ifixits". (Completely unsolicited).

Jim

Jim Brennan - Responder

Hi guys, I have a Canon SX500 IS and I jumped inside the swimming pool with its original battery by mistake so it was wet and decided to buy another battery after 4 years and put back on but it's still not switching on

I need some advice guys please what should I do?

Lwazi - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 6

Duração total: 1,126