Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen. Remove the 2 screws (4.08 mm) on the other side.  One is located under the rubber USB flap. Remove the last screw (2.59 mm) located on the bottom of the camera.
    • Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw (2.59 mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

  2. Remove the screw (2.59 mm) from the bottom of the camera. Remove the screw (4.08 mm) from the menu button side of the camera. Note: the 2 screws on the other side of the camera were already removed when taking off the back cover.
    • Remove the screw (2.59 mm) from the bottom of the camera.

    • Remove the screw (4.08 mm) from the menu button side of the camera.

    • Note: the 2 screws on the other side of the camera were already removed when taking off the back cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Robert Manno

Membro desde: 05-01-2011

432 reputação

4 Guias de autoria

Equipe

Cal Poly, Team 13-3, Forte Winter 2011 Membro de Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 Membros

8 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 2,678