Conserte seus objetos Comunidade Loja

Canon Powershot ELPH 100 HS Outer Case Replacement

Introdução

Hello everyone, this step by step guide will hep you put a new outer case replacement on your Canon Powershot ELPH 100 HS!

O que você precisa

  1. Canon Powershot ELPH 100 HS Outer Case Replacement, Outer Case: passo 1, imagem 1 %32

    • Using the Phillips #00 screwdriver, remove the two 3.1mm screws from the bottom of the camera.

    • Keep track of all the screws that are being taken out from the outer case.

    • The display screen of the camera should be facing towards you.

    Editar

  2. Canon Powershot ELPH 100 HS Outer Case Replacement: passo 2, imagem 1 %32

    • Ensure that the screen is facing you, and then rotate it till you see the screws on the side of the camera.

    • Use the Phillips #00 screwdriver to remove the two 3.1 mm screws.

    Editar

  3. Canon Powershot ELPH 100 HS Outer Case Replacement: passo 3, imagem 1 %32 Canon Powershot ELPH 100 HS Outer Case Replacement: passo 3, imagem 2 %32

    • With the screen still facing you, rotate the camera 180 degrees.

    • The side with the charging port should now be facing up.

    Editar

  5. Canon Powershot ELPH 100 HS Outer Case Replacement: passo 4, imagem 1 %32 Canon Powershot ELPH 100 HS Outer Case Replacement: passo 4, imagem 2 %32

    • Use the Philips #00 screwdriver to pry open the charging port cover.

    • Once you pry open the charging port cover, rotate the cover so that you have access to the screw underneath. Which is seen in the next image.

    • Remove both 3.1 mm screws using the Phillips #00 screwdriver.

    • The image still shows the screw from step 3 in place.

    Editar

  6. Canon Powershot ELPH 100 HS Outer Case Replacement: passo 5, imagem 1 %32 Canon Powershot ELPH 100 HS Outer Case Replacement: passo 5, imagem 2 %32

    • Turn the camera so the bottom is once again facing up.

    • With the battery door still open, use a spudger to remove the cover from the front of the camera.

    • Carefully go around all of the edges until the cover is released.

    Editar

  7. Canon Powershot ELPH 100 HS Outer Case Replacement: passo 6, imagem 1 %32

    • Once the entire front cover has been released carefully pull it off.

    • Be careful not to break the tabs that hold it in place.

    Editar

  8. Canon Powershot ELPH 100 HS Outer Case Replacement: passo 7, imagem 1 %32 Canon Powershot ELPH 100 HS Outer Case Replacement: passo 7, imagem 2 %32 Canon Powershot ELPH 100 HS Outer Case Replacement: passo 7, imagem 3 %32

    • Just like Step 4-6 , carefully use the Spudger to remove the back cover.

    • Go along all the borders of the back cover so that it releases from the camera safely.

    • Be careful not to break the tabs.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Autor(a)

com 8 outros contribuidores

Jacob

Membro desde: 03/17/15

561 Reputação

Autoria de 3 guias

Emblemas: 10

+7 outros emblemas

Equipe

Michigan Tech, Team 1-10, Lauer Spring 2015 Membro de Michigan Tech, Team 1-10, Lauer Spring 2015

MTU-LAUER-S15S1G10

Membros da 2

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 7

Últimos 30 dias: 15

Duração total: 1,582