Introdução

This guide explains the location of exterior screws and the process to remove the rear panel.

  1. Unscrew the three small screws on the bottom.
    • Unscrew the three small screws on the bottom.

    • remove the wrist strap

  2. Remove the screw in the CF compartment.
    • Remove the screw in the CF compartment.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Open the rubber Digital AV Out compartment flap. Pry the battery with the IFIXIT opening tool. Carefully pull out the battery with two fingers.
    • Open the rubber Digital AV Out compartment flap.

      • Pry the battery with the IFIXIT opening tool.

      • Carefully pull out the battery with two fingers.

        • Unscrew the two screws that are now visible.

  5. Starting from the bottom, carefully pull the casing off. The casing will now pivot at the top.
    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

      • There are three catches that hold the back casing to the body.

      • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

  6. The interior of the camera should look like this.
    • The interior of the camera should look like this.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Shalan Ertis

Member since: 26-01-2010

62 reputação

3 Guides authored

Equipe

Cal Poly, Team 14-40, Regan Winter 2010 Membro de Cal Poly, Team 14-40, Regan Winter 2010

CPSU-REGAN-W10S14G40

5 Membros

8 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 3,012