Conserte seus objetos Comunidade Loja

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Canon Powershot A610 Speaker Replacement

Introdução

The speaker is on the underside of the top casing and will involve some minor technical skills.

O que você precisa

  1. Canon Powershot A610 Speaker Replacement, Speaker: passo 1, imagem 1 %32 Canon Powershot A610 Speaker Replacement, Speaker: passo 1, imagem 2 %32 Canon Powershot A610 Speaker Replacement, Speaker: passo 1, imagem 3 %32

    • Locate and remove the three screws attaching the side panel.

    • Remove the side paneling and the two remaining screws attached to the frame of the camera.

    Editar

  2. Canon Powershot A610 Speaker Replacement: passo 2, imagem 1 %32

    • Remove the two screws on the bottom panel of the camera.

    Editar

  3. Canon Powershot A610 Speaker Replacement: passo 3, imagem 1 %32

    • Open the battery cover.

    • Locate and remove the four screws inside.

    • One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

    • Close the battery cover.

    Editar

  4. Canon Powershot A610 Speaker Replacement: passo 4, imagem 1 %32 Canon Powershot A610 Speaker Replacement: passo 4, imagem 2 %32

    • Open the "DIGITAL AV OUT" door on the camera.

    • Remove the three screws. The door can be removed from the camera.

    Editar

  6. Canon Powershot A610 Speaker Replacement: passo 5, imagem 1 %32

    • Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • The top cover does not completely detach.

    Editar

  7. Canon Powershot A610 Speaker Replacement: passo 6, imagem 1 %32 Canon Powershot A610 Speaker Replacement: passo 6, imagem 2 %32

    • Open the battery cover.

    • Gently pull apart the front cover from the camera.

    • This may require some force. Be careful not to break the plastic.

    Editar

  8. Canon Powershot A610 Speaker Replacement: passo 7, imagem 1 %32 Canon Powershot A610 Speaker Replacement: passo 7, imagem 2 %32

    • Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon.

    Editar

  9. Canon Powershot A610 Speaker Replacement: passo 8, imagem 1 %32

    • Remove the 3mm screw holding the metal frame.

    Editar

  10. Canon Powershot A610 Speaker Replacement: passo 9, imagem 1 %32 Canon Powershot A610 Speaker Replacement: passo 9, imagem 2 %32

    • Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom.

    • You may need to use a bit of force as the speaker be glued in to the top casing.

    • There is a soft fabric speaker cover separating the speaker from the casing. Make sure not to remove it from its position in the housing.

    Editar

  11. Canon Powershot A610 Speaker Replacement: passo 10, imagem 1 %32

    • Unsolder the speaker at two points and reattach the new speaker.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 8 outros contribuidores

Matthew Ramirez

Membro desde: 01/20/11

625 Reputação

Autoria de 5 guias

Emblemas: 11

+8 outros emblemas

Equipe

Cal Poly, Team 11-26, Maness Winter 2011 Membro de Cal Poly, Team 11-26, Maness Winter 2011

CPSU-MANESS-W11S11G26

Membros da 3

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 6

Duração total: 2,915