Conserte seus objetos Comunidade Loja

Canon PowerShot SX260 HS Motherboard Replacement

O que você precisa

  1. Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: passo 1, imagem 1 %32 Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: passo 1, imagem 2 %32 Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: passo 1, imagem 3 %32

    • *Be sure to always remove the battery from the camera before disassembling to avoid permanent damage.

    • There are a total of 6 (3mm) external screws that will need to be removed; 2 on the left side, 2 on the bottom, and 2 on the right side.

    • 1.) Remove the 2 screws on the left side

    • 2.) Remove the 2 screws on the bottom of the camera.

    • 3.) Remove the 2 screws on the right side of the camera.

    Editar

  2. Canon PowerShot SX260 HS Motherboard Replacement: passo 2, imagem 1 %32

    • Use spludger tool or small flathead screw driver to gently lift and remove back face plate.

    Editar

  3. Canon PowerShot SX260 HS Motherboard Replacement: passo 3, imagem 1 %32

    • After removing exterior screws, gently lift off the front face plate.

    Editar

  4. Canon PowerShot SX260 HS Motherboard Replacement: passo 4, imagem 1 %32

    • After removing the front faceplate you will find 4 (3mm) screws on the interior.

    • Remove all 4 interior screws.

    Editar

  6. Canon PowerShot SX260 HS Motherboard Replacement: passo 5, imagem 1 %32

    • Remove 1 (6 mm) Screw from the bottom of the silver metal plate. The screw is also silver

    Editar

  7. Canon PowerShot SX260 HS Motherboard Replacement: passo 6, imagem 1 %32

    • With blue spludger tool gently lift the metal plate from the face of the camera.

    • The plate is held by a piece of double sided tape so there will be a bit of resistance.

    Editar

  8. Canon PowerShot SX260 HS Motherboard Replacement: passo 7, imagem 1 %32

    • Remove 3 (3 mm) screws from the top surface of the motherboard.

    • You will notice that there is one on the top, and 2 on the bottom in a triangular shape.

    Editar

  9. Canon PowerShot SX260 HS Motherboard Replacement: passo 8, imagem 1 %32

    • Gently remove the ribbon cable from the top of the motherboard with a pair of tweezers.

    • Be careful during this step not to rip or tear the cable.

    Editar

  10. Canon PowerShot SX260 HS Motherboard Replacement: passo 9, imagem 1 %32

    • Use the blue spludger tool to gently unplug the last ribbon cable that is attached to the motherboard.

    Editar

  11. Canon PowerShot SX260 HS Motherboard Replacement: passo 10, imagem 1 %32 Canon PowerShot SX260 HS Motherboard Replacement: passo 10, imagem 2 %32

    • Remove the motherboard with your fingers.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Tyler Kelch

Membro desde: 03/05/15

622 Reputação

Autoria de 4 guias

Emblemas: 8

+5 outros emblemas

Equipe

Sam Houston State, Team 11-8, Blackburne Winter 2015 Membro de Sam Houston State, Team 11-8, Blackburne Winter 2015

SHSU-BLACKBURNE-W15S11G8

Membros da 2

Autoria de 4 guias

2 comentários

Where is the internal clock/calendar battery located?

GPa Rocks - Responder

Internal clock battery is under circuit board on right side of lens as seen in photo for Step 9. See 2:48 - 3:19 in this video: https://www.youtube.com/watch?v=Awmm6hDm....

Paul Unger - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 15

Últimos 30 dias: 32

Duração total: 2,114