Ir para o conteúdo principal

Introdução

Remove the back cover before removing LCD.

Peças

Nenhum componente especificado.

  1. Canon PowerShot SD800 IS LCD Assembly Replacement, Back Cover: passo 1, imagem 1 %32
    • Remove one 2.25mm screw on the bottom.

  2. Canon PowerShot SD800 IS LCD Assembly Replacement: passo 2, imagem 1 %32
    • Remove two 2.25mm screws on the right side looking from the front.

  3. Canon PowerShot SD800 IS LCD Assembly Replacement: passo 3, imagem 1 %32
    • Remove one 4.7mm screw on the side with the AV output.

  4. Canon PowerShot SD800 IS LCD Assembly Replacement: passo 4, imagem 1 %32
    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

  5. Canon PowerShot SD800 IS LCD Assembly Replacement, LCD Assembly: passo 5, imagem 1 %32
    • Remove 2 2.4mm screws on bottom.

  6. Canon PowerShot SD800 IS LCD Assembly Replacement: passo 6, imagem 1 %32
    • Follow the small data cable to where it connects to the camera.

    • Lift the back white portion to unlock the cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

  7. Canon PowerShot SD800 IS LCD Assembly Replacement: passo 7, imagem 1 %32
    • Gently lift LCD display off.

    • There will be two data cables still attached to the camera. Do not break them.

    • There may be a loose strip of metal along the inner side of the LCD display for a secure fit.

  8. Canon PowerShot SD800 IS LCD Assembly Replacement: passo 8, imagem 1 %32
    • Follow the larger cable to where it connects to the camera.

    • Lift the front black portion of the connector to unlock the data cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Jeremy Rabaino

Membro desde: 10/10/2010

135 Reputação

6 Guias de autoria

Team

Cal Poly, Team 20-9, Maness Fall 2010 Membro de Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 Membros

6 Guias de autoria

One Comment

where can I buy a replacement LCD screen for a SD800 IS

ALFRED - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 2,195