Introdução
This guide is required in order to replace any of the deeper components in the camera. Any component of the camera cannot be reached unless the back cover is removed.
O que você precisa
-
-
Remove the 2mm screw from the back of the camera.
-
Remove two 2mm screws from the bottom of the camera.
-
Remove two 2mm screws the left side of camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
University of North Texas, Team S5-G3, Thompson Fall 2018 Membro de University of North Texas, Team S5-G3, Thompson Fall 2018
UNT-THOMPSON-F18S5G3
Membros da 4
Autoria de 5 guias
