Ir para o conteúdo principal

Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.

O que você precisa

  1. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 1, imagem 1 %32 : passo 1, imagem 2 %32 : passo 1, imagem 3 %32
    • The camera used to create these repair guides had a broken lens assembly. As a result, the lens is sticking out in all of the photos, but it is important to note that this should not be the case with your camera. The lens should retract itself back into the camera when it is turned off.

    • Use your fingernail to slide the dark gray tab located on the bottom of the device towards the edge of camera.

    • Slide the light gray door away from the LCD screen and pull up to open the door.

    • Both battery and memory card should now be visible.

  2. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 2, imagem 1 %32 : passo 2, imagem 2 %32
    • Rotate the small brown tab towards the edge of the camera.

    • The battery should pop up.

  3. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 3, imagem 1 %32
    • Pull the battery straight out of the battery holder.

    • When putting the battery back in, make sure it is oriented the same as it was before.

Linha de Chegada

James Loy

Membro desde: 10/06/10

103 Reputação

Autoria de 7 guias

Equipe

Cal Poly, Team 5-12, Maness Fall 2010 Membro de Cal Poly, Team 5-12, Maness Fall 2010

CPSU-MANESS-F10S5G12

Membros da 4

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 2,963