Ir para o conteúdo principal

Canon PowerShot SD1400 IS User Interface Panel Replacement

O que você precisa

  1. Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: passo 1, imagem 1 %32 Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: passo 1, imagem 2 %32 Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: passo 1, imagem 3 %32
    • Remove the four 2.0 mm Phillips screws of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.

  2. Canon PowerShot SD1400 IS User Interface Panel Replacement: passo 2, imagem 1 %32
    • Remove the 4.0 mm Phillips screw located on the bottom of the camera.

  3. Canon PowerShot SD1400 IS User Interface Panel Replacement: passo 3, imagem 1 %32
    • Remove the front face panel of the camera by hand using firm pressure.

    • If one point of the face is stuck to the body, check if there is a screw preventing the front face from coming off.

  4. Canon PowerShot SD1400 IS User Interface Panel Replacement: passo 4, imagem 1 %32
    • Remove the rear panel of the camera by hand using firm pressure.

  5. Canon PowerShot SD1400 IS User Interface Panel Replacement: passo 5, imagem 1 %32
    • Remove the user interface panel by hand. The panel may fall out on its own, this is normal.

    • Replace the user interface panel by setting it in position.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Braxton Beal

Membro desde: 01/30/18

696 Reputação

Autoria de 3 guias

Equipe

Baylor, Team S1-G3, Johnson Spring 2018 Membro de Baylor, Team S1-G3, Johnson Spring 2018

BU-JOHNSON-S18S1G3

Membros da 3

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 240