Conserte seus objetos Comunidade Loja

Canon PowerShot SD1200 IS Function Button Board Replacement

Introdução

Use this guide to replace the function buttons on the back of the camera.

O que você precisa

  1. Canon PowerShot SD1200 IS Function Button Board Replacement, Front and Rear Covers: passo 1, imagem 1 %32

    • Remove the battery.

    Editar

  2. Canon PowerShot SD1200 IS Function Button Board Replacement: passo 2, imagem 1 %32 Canon PowerShot SD1200 IS Function Button Board Replacement: passo 2, imagem 2 %32 Canon PowerShot SD1200 IS Function Button Board Replacement: passo 2, imagem 3 %32

    • Remove the two screws from the side of the camera casing with the strap. (4mm Phillips 00)

    • Remove the two screws from the bottom of the camera. (4mm Phillips 00)

    • Remove the two screws from the right side of the camera opposite the strap. (2mm Phillips 00)

    Editar

  4. Canon PowerShot SD1200 IS Function Button Board Replacement: passo 3, imagem 1 %32 Canon PowerShot SD1200 IS Function Button Board Replacement: passo 3, imagem 2 %32

    • Pull off the front cover.

    • If the top of the cover sticks, use gentle downward pressure on the retention clips above the lens to release.

    • Remove the back cover.

    Editar

  5. Canon PowerShot SD1200 IS Function Button Board Replacement, Function Buttons: passo 4, imagem 1 %32

    • Use the spudger to lift the tab on the Zero Insertion Force (ZIF) connector located at the top of the function button board.

    • Be sure you are prying up on the hinged retaining flap, not the connector itself.

    • Slide out the ribbon cable from the connector.

    Editar

  6. Canon PowerShot SD1200 IS Function Button Board Replacement: passo 5, imagem 1 %32

    • Remove the top screw from the function button board. (3.5mm Phillips 00)

    • Remove the bottom screw from the function button board. (2.5mm Phillips 00)

    Editar

  7. Canon PowerShot SD1200 IS Function Button Board Replacement: passo 6, imagem 1 %32

    • Lift out the function button board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Jeff Casper

Membro desde: 09/15/16

848 Reputação

Autoria de 7 guias

Emblemas: 18

+15 outros emblemas

Equipe

USF Tampa, Team 17-5, Blackwell Fall 2016 Membro de USF Tampa, Team 17-5, Blackwell Fall 2016

USFT-BLACKWELL-F16S17G5

Membros da 3

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 214