Peças

Não são necessárias peças.

  1. Remove the two screws from the side panel closest to the camera lens.
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

    Adicionar comentário

  2. Remove the two screws from the camera bottom panel.
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

    Adicionar comentário

    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

    Adicionar comentário

    • Pull the back panel away from the camera body, starting at the end with the function buttons.

    Adicionar comentário

    • Remove the small cover panel and attached wrist strap mount.

    Adicionar comentário

    • Remove the front cover by gently pulling it away from the camera body.

    Adicionar comentário

    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

    Adicionar comentário

    • Using the spudger, take off the shutter button by prying the small tab on the front side of the camera.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Member since: 19-01-2012

486 reputação

9 Guides authored

Equipe

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Membros

10 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 891