Ir para o conteúdo principal

Canon PowerShot SD1000 LCD Screen Replacement

O que você precisa

  1. Canon PowerShot SD1000 LCD Screen Replacement, Back Panel: passo 1, imagem 1 %32 Canon PowerShot SD1000 LCD Screen Replacement, Back Panel: passo 1, imagem 2 %32
    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. Canon PowerShot SD1000 LCD Screen Replacement: passo 2, imagem 1 %32
    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. Canon PowerShot SD1000 LCD Screen Replacement: passo 3, imagem 1 %32
    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. Canon PowerShot SD1000 LCD Screen Replacement: passo 4, imagem 1 %32
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Canon PowerShot SD1000 LCD Screen Replacement: passo 5, imagem 1 %32
    • Remove the small cover panel and the attached wrist strap mount.

  6. Canon PowerShot SD1000 LCD Screen Replacement, Front Case: passo 6, imagem 1 %32
    • Remove the front cover by gently pulling it away from the camera body.

  7. Canon PowerShot SD1000 LCD Screen Replacement: passo 7, imagem 1 %32
    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

  8. Canon PowerShot SD1000 LCD Screen Replacement, LCD Screen: passo 8, imagem 1 %32
    • Remove the two 2.4 mm screws located at the top of the LCD panel.

  9. Canon PowerShot SD1000 LCD Screen Replacement: passo 9, imagem 1 %32 Canon PowerShot SD1000 LCD Screen Replacement: passo 9, imagem 2 %32
    • Pull up the metal frame surrounding the LCD screen starting at the side of the camera.

  10. Canon PowerShot SD1000 LCD Screen Replacement: passo 10, imagem 1 %32
    • Push the metal frame away from the metal tab using the spudger to detach the frame.

    • Rotate the metal frame upwards.

    • The metal framing should be attached by a metal tab towards the bottom of the camera, near the function buttons.

  11. Canon PowerShot SD1000 LCD Screen Replacement: passo 11, imagem 1 %32 Canon PowerShot SD1000 LCD Screen Replacement: passo 11, imagem 2 %32
    • Carefully lift the metal frame from the camera.

    • Remove the black LCD screen, leaving the thin lens pieces in place.

    • BE CAREFUL; both components are attached by an orange connector ribbon and cannot be removed yet.

  12. Canon PowerShot SD1000 LCD Screen Replacement: passo 12, imagem 1 %32 Canon PowerShot SD1000 LCD Screen Replacement: passo 12, imagem 2 %32 Canon PowerShot SD1000 LCD Screen Replacement: passo 12, imagem 3 %32
    • Carefully pull on the orange connector ribbon to disconnect the LCD screen.

    • The LCD screen can be pulled out of the frame before disconnecting its connector ribbon.

    • Tweezers are helpful to disconnect the ribbon.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Phillip Phung

Membro desde: 01/19/12

624 Reputação

Autoria de 9 guias

Equipe

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

Membros da 4

Autoria de 12 guias

Um comentário

Very helpful. These units still sell for a lot more than the cost of the replacement LCD

George Francis - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 9

Últimos 30 dias: 40

Duração total: 3,481