Cancelar

Canon PowerShot SD1000 Front Case of Camera Replacement

Escrito Por: Phillip Phung (and 7 other contributors)

Comentários: 0
Favoritos: 0

Canon PowerShot SD1000 Front Case of Camera Replacement

Dificuldade

Moderado

Passos

7

Tempo necessário

Sugerir um tempo??

Ferramentas

Comprar estas ferramentas

Phillips #00 Screwdriver

US$6,99

Comprar

Peças

Não são necessárias peças.

Passo 1 Back Panel

Remove the two screws from the side panel closest to the camera lens.

Remove the two screws from the side panel closest to the camera lens.
Note: These screws are 2.9 mm long.

Passo 2

Remove the two screws from the camera bottom panel.

Remove the two screws from the camera bottom panel.
Note: These screws are 2.9 mm long.

Passo 3

Remove the 2 screws from the side panel farthest from the lens.
Note: These screws are 2.9 mm long.

Passo 4

Pull the back panel away from the camera body, starting at the end with the function buttons.

Passo 5

Remove the small cover panel and attached wrist strap mount.

Passo 6 Front Case of Camera

Remove the front cover by gently pulling it away from the camera body.

Passo 7

Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

with 7 other contributors

Phillip Phung

Member since: 19-01-2012

486 reputação

9 Guides authored

Equipe

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Membros

10 Guides authored

0 comentários

Adicionar um comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,020