Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Canon PowerShot SD1000 Front Case Replacement

O que você precisa

  1. Canon PowerShot SD1000 Front Case Replacement, Back Panel: passo 1, imagem 1 %32 Canon PowerShot SD1000 Front Case Replacement, Back Panel: passo 1, imagem 2 %32
    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. Canon PowerShot SD1000 Front Case Replacement: passo 2, imagem 1 %32
    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. Canon PowerShot SD1000 Front Case Replacement: passo 3, imagem 1 %32
    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. Canon PowerShot SD1000 Front Case Replacement: passo 4, imagem 1 %32
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Canon PowerShot SD1000 Front Case Replacement: passo 5, imagem 1 %32
    • Remove the small cover panel and the attached wrist strap mount.

  6. Canon PowerShot SD1000 Front Case Replacement, Front Case: passo 6, imagem 1 %32
    • Remove the front cover by gently pulling it away from the camera body.

  7. Canon PowerShot SD1000 Front Case Replacement: passo 7, imagem 1 %32
    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Membro desde: 01/19/12

624 Reputação

Autoria de 9 guias

Equipe

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 19

Duração total: 1,330