Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Canon PowerShot SD1000 Back Panel Replacement

O que você precisa

  1. Canon PowerShot SD1000 Back Panel Replacement, Back Panel: passo 1, imagem 1 %32 Canon PowerShot SD1000 Back Panel Replacement, Back Panel: passo 1, imagem 2 %32
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

  2. Canon PowerShot SD1000 Back Panel Replacement: passo 2, imagem 1 %32
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

  3. Canon PowerShot SD1000 Back Panel Replacement: passo 3, imagem 1 %32
    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

  4. Canon PowerShot SD1000 Back Panel Replacement: passo 4, imagem 1 %32
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Canon PowerShot SD1000 Back Panel Replacement: passo 5, imagem 1 %32
    • Remove the small cover panel and the attached wrist strap mount.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Phillip Phung

Membro desde: 01/19/12

624 Reputação

Autoria de 9 guias

Equipe

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 16

Duração total: 1,846