Ir para o conteúdo principal

Introdução

The first step to replacing any camera parts is to remove the back panel. This only involves removing several small screws.

Peças

Nenhum componente especificado.

  1. Remove the two screws from the side panel closest to the camera lens. Note: These screws are 2.9 mm long.
    • Remove the two screws from the side panel closest to the camera lens.

    • Note: These screws are 2.9 mm long.

  2. Remove the two screws from the camera bottom panel.
    • Remove the two screws from the camera bottom panel.

    • Note: These screws are 2.9 mm long.

  3. Remove the 2 screws from the side panel farthest from the lens.
    • Remove the 2 screws from the side panel farthest from the lens.

    • Note: These screws are 2.9 mm long.

  4. Pull the back panel away from the camera body, starting at the end with the function buttons.
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Remove the small cover panel and attached wrist strap mount.
    • Remove the small cover panel and attached wrist strap mount.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Membro desde: 19-01-2012

486 Reputation

9 Guias de autoria

Team

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Membros

10 Guias de autoria

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 1,541