Canon PowerShot SD1000 Back Panel Replacement

Escrito Por: Phillip Phung (e 11 outros contribuidores)

Comentários: 0
Favoritos: 1

Canon PowerShot SD1000 Back Panel Replacement

Dificuldade

Fácil

Passos

Tempo necessário

5 minutos

Introdução

The first step to replacing any camera parts is to remove the back panel. This only involves removing several small screws.

Ferramentas

Comprar estas ferramentas

Phillips #00 Screwdriver

$5.49

Comprar

Peças

Nenhum componente especificado.

Passo 1 Back Panel

Remove the two screws from the side panel closest to the camera lens.

Remove the two screws from the side panel closest to the camera lens.
Note: These screws are 2.9 mm long.

Editar

Passo 2

Remove the two screws from the camera bottom panel.

Remove the two screws from the camera bottom panel.
Note: These screws are 2.9 mm long.

Editar

Passo 3

Remove the 2 screws from the side panel farthest from the lens.

Remove the 2 screws from the side panel farthest from the lens.
Note: These screws are 2.9 mm long.

Editar

Passo 4

Pull the back panel away from the camera body, starting at the end with the function buttons.

Pull the back panel away from the camera body, starting at the end with the function buttons.

Editar

Passo 5

Remove the small cover panel and attached wrist strap mount.

Remove the small cover panel and attached wrist strap mount.

Editar

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

com 11 outros contribuidores

Phillip Phung

Membro desde: 19/01/2012

513 Reputação

9 Guias de autoria

Emblemas: 10

+7 outros emblemas

Equipe

Cal Poly, Team 8-18, Maness Winter 2012 Membro de Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Membros

10 Guias de autoria

0 comentários

Adicionar um comentário

Conserte seus objetos

Direito de executar reparos

Loja

Canon PowerShot SD1000 Back Panel Replacement