Introdução

This guide is for replacing the speaker on your Canon PowerShot S80. If you have already checked your volume settings and the speaker still does not give audio cues when the camera is in use, this guide will help you replace the faulty speaker.

Peças

Não são necessárias peças.

  1. Remove the knot on the wrist lanyard.
    • Remove the knot on the wrist lanyard.

    • Remove the battery and memory card.

    Adicionar comentário

  2. Remove all screws from sides of outer casing.
    • Remove all screws from sides of outer casing.

    • Begin removing the screws on the bottom of the outer casing.

    • Remove the rest of the screws from the outer casing.

    Adicionar comentário

    • Gently pull the front cover off the camera.

    Adicionar comentário

    • Open the "A/V Out Digital" cover slide, and remove the screw inside.

    • Gently pull off the back casing.

    • Remove the black "L" shaped piece of metal.

    Adicionar comentário

    • Remove the screw and unplug the wire lead.

    • Gently remove the speaker from the camera body.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

BrettH

Member since: 28-10-2009

219 reputação

5 Guides authored

Equipe

Cal Poly, Team 19-5, Maness SU 2012 Membro de Cal Poly, Team 19-5, Maness SU 2012

CPSU-MANESS-SU12S19G5

1 Membro

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,855