Peças

Não são necessárias peças.

  1. Unscrew five Phillips screws using a #0 Phillips screwdriver.
    • Unscrew five Phillips screws using a #0 Phillips screwdriver.

    • One screw is on upper right corner of the back panel.

    • The other four screws are on the bottom of the camera.

    Adicionar comentário

  2. Open the memory card cover by moving the slide switch toward the top end of of the camera.
    • Open the memory card cover by moving the slide switch toward the top end of of the camera.

    • Remove the memory card from the slot.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the rear cover from the rest of the camera.

    • This may require gentle rocking of the case to free it.

    Adicionar comentário

    • Unscrew the four Phillips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.

    Adicionar comentário

    • Free the front cover from the rest of the camera.

    • The cover may require gentle rocking to remove.

    Adicionar comentário

Linha de Chegada

Uma outra pessoa concluiu este guia.

Nathan Balcom

Member since: 21-01-2010

81 reputação

8 Guides authored

Equipe

Cal Poly, Team 16-28, Maness Winter 2010 Membro de Cal Poly, Team 16-28, Maness Winter 2010

CPSU-MANESS-W10S16G28

4 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,442