Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Canon PowerShot S400 LCD Screen Replacement

O que você precisa

  1. Canon PowerShot S400 LCD Screen Replacement, LCD Screen: passo 1, imagem 1 %32 Canon PowerShot S400 LCD Screen Replacement, LCD Screen: passo 1, imagem 2 %32
    • Unless stated otherwise, use a Phillips #00 screwdriver to remove all screws.

    • On the backside of the camera, remove the 4.75 mm screw that sits at the top right corner.

    • Remove the four 4.75 mm screws that sit at the bottom of the camera.

  2. Canon PowerShot S400 LCD Screen Replacement: passo 2, imagem 1 %32
    • On the side of the camera, remove the two 4.75 mm screws that sit near the USB digital terminal.

  3. Canon PowerShot S400 LCD Screen Replacement: passo 3, imagem 1 %32 Canon PowerShot S400 LCD Screen Replacement: passo 3, imagem 2 %32 Canon PowerShot S400 LCD Screen Replacement: passo 3, imagem 3 %32
    • On the side of the camera, remove the four 4.75 mm screws that sit near the wrist strap mount.

    • Remove the two small metal plates, which the four screws held in place.

  4. Canon PowerShot S400 LCD Screen Replacement: passo 4, imagem 1 %32 Canon PowerShot S400 LCD Screen Replacement: passo 4, imagem 2 %32
    • When removing the casing, do not drop the small black plastic piece. This piece sits in a small gap above the lens, to the left of the flash, and underneath the camera case.

    • Remove the small black plastic piece and set it aside.

    • If necessary, use tweezers to remove the small black plastic piece.

    • Detach the front case and back case.

  5. Canon PowerShot S400 LCD Screen Replacement: passo 5, imagem 1 %32
    • Do not remove the metal plate this step refers to. Removal at this step may damage the ribbon cable. Wait until the next step to remove the plate.

    • Remove the 3.5 mm screw that sits on the metal plate at the bottom of the camera.

    • Remove the two other 3.5 mm screws that sit on the side, to the left of the screw you just removed.

    • In the image, we have already removed some of the screws.

  6. Canon PowerShot S400 LCD Screen Replacement: passo 6, imagem 1 %32 Canon PowerShot S400 LCD Screen Replacement: passo 6, imagem 2 %32 Canon PowerShot S400 LCD Screen Replacement: passo 6, imagem 3 %32
    • A ribbon cable attaches to the metal plate and to the main circuit board, on the front of the camera.

    • Gently release the black latch.

    • Remove the ribbon cable and metal plate assembly.

  7. Canon PowerShot S400 LCD Screen Replacement: passo 7, imagem 1 %32 Canon PowerShot S400 LCD Screen Replacement: passo 7, imagem 2 %32
    • On the backside of the camera, remove the 3.5 mm screw that sits to the left of the viewfinder and above the LCD screen.

    • Remove the second 3.5 mm screw that sits directly above the LCD screen.

    • Gently detach the ribbon cable.

  8. Canon PowerShot S400 LCD Screen Replacement: passo 8, imagem 1 %32
    • Locate the ribbon cable on the main circuit board, which sits below the lens.

    • Gently release the black latch on the ribbon cable connector and detach the ribbon cable.

  9. Canon PowerShot S400 LCD Screen Replacement: passo 9, imagem 1 %32 Canon PowerShot S400 LCD Screen Replacement: passo 9, imagem 2 %32
    • Remove the LCD screen and set it aside.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ross Bryan

Membro desde: 01/21/11

359 Reputação

Autoria de 3 guias

Equipe

Cal Poly, Team 5-19, Amido Winter 2011 Membro de Cal Poly, Team 5-19, Amido Winter 2011

CPSU-AMIDO-W11S5G19

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 11

Duração total: 3,044