O que você precisa
-
-
The inside of your Canon PowerShot A4000 camera should have a picture showing how to reinsert your memory card.
-
Line the memory card up like it is shown in the camera and using your thumb, press down on the card until you hear a click. Your memory card is now back in place and ready for use.
-
-
-
-
To open the battery compartment where the memory card is stored, refer to the Battery Replacement Guide.
-
The memory card is stored behind the battery on the side opposite of the lens as outlined by the red rectangle in the picture.
-
To remove the memory card, use your thumb to press down on the exposed part of the card.
-
The card will dip down further into the compartment and then you will hear a click as the card is released.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Equipe
Clemson, Team 1-3, Benson Fall 2014 Membro de Clemson, Team 1-3, Benson Fall 2014
CLEM-BENSON-F14S1G3
Membros da 3
Autoria de 17 guias
