Introdução

This guide shows you how to install a new lens connector.

Peças

Não são necessárias peças.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
  • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

Adicionar comentário

Using your finger, peel back the textured grip so the components are separated.
  • Using your finger, peel back the textured grip so the components are separated.

Adicionar comentário

  • Using the flat end of a spudger, loosen the connection between the front panel and the device.

  • Remove the front panel using your hands.

Adicionar comentário

  • Using a Phillips #00 screwdriver, remove the 5 indicated screws

    • Five 6.2 mm Phillips screws

Adicionar comentário

  • Using your hands, remove the top black ring.

  • WARNING! The indicated piece is spring loaded. Prepare for it to eject when taking off top ring.

    • Spring located here.

Adicionar comentário

  • There are two silver metal rings.

  • Remove the top silver metal ring.

Adicionar comentário

  • Remove the bottom silver ring.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Zach

Member since: 04-04-2012

40 reputação

8 Guides authored

Equipe

Cal Poly, Team 14-9, Forte Spring 2012 Membro de Cal Poly, Team 14-9, Forte Spring 2012

CPSU-FORTE-S12S14G9

5 Membros

12 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 1,386