Ir para o conteúdo principal

Canon EOS 300 Bottom Panel Replacement

O que você precisa

  1. Canon EOS 300 Bottom Panel Replacement, Batteries: passo 1, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement, Batteries: passo 1, imagem 2 %32 Canon EOS 300 Bottom Panel Replacement, Batteries: passo 1, imagem 3 %32
    • Open up the battery door.

  2. Canon EOS 300 Bottom Panel Replacement: passo 2, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement: passo 2, imagem 2 %32
    • Remove the batteries from the camera by sliding them out into your palm.

  3. Canon EOS 300 Bottom Panel Replacement, Side Panel with Lever: passo 3, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement, Side Panel with Lever: passo 3, imagem 2 %32
    • Release the side latch to open the back panel.

  4. Canon EOS 300 Bottom Panel Replacement: passo 4, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement: passo 4, imagem 2 %32
    • Remove the two black 4.5mm screws above and below the latch.

  5. Canon EOS 300 Bottom Panel Replacement: passo 5, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement: passo 5, imagem 2 %32
    • Using your finger, carefully pry open the side panel from the top of camera.

    • Pull panel downwards to remove.

    • Make sure to keep track of the small black piece of rubber under the latch.

  6. Canon EOS 300 Bottom Panel Replacement, Front Panel: passo 6, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement, Front Panel: passo 6, imagem 2 %32
    • Remove the two silver 6mm Phillips #1 screws.

  7. Canon EOS 300 Bottom Panel Replacement: passo 7, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement: passo 7, imagem 2 %32
    • Flip camera over to the bottom.

    • Remove the one 5mm Phillips #1 silver screw.

  8. Canon EOS 300 Bottom Panel Replacement: passo 8, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement: passo 8, imagem 2 %32
    • Remove the front panel by pulling away from the side with the lever.

  9. Canon EOS 300 Bottom Panel Replacement, Bottom Panel: passo 9, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement, Bottom Panel: passo 9, imagem 2 %32
    • Remove three black 7.3mm Phillips #1 screws located on the corners of the camera.

    • Remove five black 4.8mm Phillips #1 screws.

  10. Canon EOS 300 Bottom Panel Replacement: passo 10, imagem 1 %32 Canon EOS 300 Bottom Panel Replacement: passo 10, imagem 2 %32 Canon EOS 300 Bottom Panel Replacement: passo 10, imagem 3 %32
    • Simply remove the bottom panel by prying it off with your finger.

    • When removing the panel, be sure the bottom of the camera is facing upright. There are loose gears that may fall out.

    • Be wary of a loose piece of foam attached to the bottom panel.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Tammy Kong

Membro desde: 01/23/14

771 Reputação

Autoria de 6 guias

Equipe

Cal Poly, Team 6-20, Maness Winter 2014 Membro de Cal Poly, Team 6-20, Maness Winter 2014

CPSU-MANESS-W14S6G20

Membros da 4

Autoria de 32 guias

Um comentário

muy buena la explicacion de como desmontar la maquina. Te has gadano los 30 puntos

Ricardo Alonso Gurrea - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 7

Duração total: 649