Introdução

This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.

Peças

Não são necessárias peças.

  1. Remove the first set of two #00 phillips screws from the lens outer casing
    • Remove the first set of two #00 phillips screws from the lens outer casing

      • The first set of screws are located on the front and bottom of the lens casing

      • Pull the screws out and set them aside so as not to lose them

    Adicionar comentário

  2. Remove the remaining two #00 phillip screws from the lens outer casing
    • Remove the remaining two #00 phillip screws from the lens outer casing

      • The second set is located left and right side of the lens casing

      • Pull the screws out and set them aside so as not to lose them

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.

    Adicionar comentário

    • Remove the four #00 phillips screws from the SLR Lens Mount

    Adicionar comentário

    • After the screws have been removed, pull the SLR Lens Mount away from the body of the camera

    • Be aware that a pin will fall out when the SLR Lens Mount is removed.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Joe Blumberg

Member since: 04-10-2011

150 reputação

Autoria de 1 guia

Equipe

UW Stout, Team 5-1, Zhou Fall 2011 Membro de UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 47

Todo: 8,018