Conserte seus objetos Comunidade Loja

Cambridge SoundWorks OontZ Angle Plus Speakers Replacement

O que você precisa

  1. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement, Rubber Casing: passo 1, imagem 1 %32

    • Remove the six screw covers from the bottom of the device.

    Editar

  2. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 2, imagem 1 %32

    • Starting from the screw covers, remove the front and back casing of the device.

    Editar

  3. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 3, imagem 1 %32

    • Carefully pull off the casing covering the ends.

    Editar

  4. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 4, imagem 1 %32

    • Slowly remove the casing from the top of the device.

    Editar

  5. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement, Speaker Grill: passo 5, imagem 1 %32

    • Unscrew the five 11.5mm Phillips screws from the bottom plate.

    Editar

  6. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 6, imagem 1 %32

    • Carefully pull apart the bottom and top plates, using the blue plastic opening tool.

    Editar

  8. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 7, imagem 1 %32

    • Once the plates are separated, slowly pull the bottom plate away from the top plate.

    • There are wires connected to both plates, so be cautious while doing this step.

    Editar

  9. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 8, imagem 1 %32

    • Use the metal spudger to bend the three bendable clamps on the ends of the speaker cover.

    • Beware, the bending process requires patience and extra time.

    Editar

  10. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 9, imagem 1 %32

    • Next, use the metal spudger to bend the four bendable clamps on the bottom of the speaker cover.

    • This step also requires some time and patience.

    Editar

  11. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 10, imagem 1 %32 Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 10, imagem 2 %32

    • Finally, bend the speaker cover upward and it will slide out.

    Editar

  12. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement, Speakers: passo 11, imagem 1 %32

    • With some force, push the motherboard straight in toward the center of the device.

    Editar

  13. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 12, imagem 1 %32

    • Pull the motherboard straight out of the device.

    • There is some adhesive on the motherboard that holds it in place. This makes the motherboard fit in the groove rather tight.

    Editar

  14. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 13, imagem 1 %32

    • Unplug the speaker's connector from the motherboard.

    Editar

  15. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 14, imagem 1 %32

    • Unscrew the eight screws holding the speakers in place.

    Editar

  16. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 15, imagem 1 %32

    • Desolder the the wires connected to the back side of both speakers.

    Editar

  17. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: passo 16, imagem 1 %32

    • Carefully push the speakers out one at a time.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

David Rice

Membro desde: 02/10/16

161 Reputação

Autoria de 1 guia

Emblemas: 6

+3 outros emblemas

Equipe

USF Tampa, Team 1-1, Nance Spring 2016 Membro de USF Tampa, Team 1-1, Nance Spring 2016

USFT-NANCE-S16S1G1

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 1,891