Pular para o conteúdo principal

Introdução

This short guide will show you how to properly replace the tape cassette in your label printer.

  1. Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open. Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.
    • Open the cassette cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling open.

  2. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  3. Insert the tape cassette into the area outlined in red, making sure that it snaps into place.
    • Insert the tape cassette into the area outlined in red, making sure that it snaps into place.

    • Our device did not come with a tape cassette but one should be inserted into the red outlined area shown.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Anna McCreary

Membro desde: 24-01-2014

101 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 13-16, Regan Winter 2014 Membro de Cal Poly, Team 13-16, Regan Winter 2014

CPSU-REGAN-W14S13G16

3 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 15

Todo: 2,335