Conserte seus objetos Comunidade Loja

Brother PT-110 Printer Motor Replacement

Introdução

The printer motor is located behind the keyboard, near the middle of the device. To access it, the back panel needs to be snapped off and the printer cartridge taken out. The middle panel needs to be unscrewed, and the motor should be visible.

O que você precisa

  1. Brother PT-110 Printer Motor Replacement, Batteries: passo 1, imagem 1 %32 Brother PT-110 Printer Motor Replacement, Batteries: passo 1, imagem 2 %32

    • Push on the side of the cover, and remove it.

    Editar

  2. Brother PT-110 Printer Motor Replacement: passo 2, imagem 1 %32

    • Remove the batteries.

    Editar

  3. Brother PT-110 Printer Motor Replacement, Back Plate: passo 3, imagem 1 %32 Brother PT-110 Printer Motor Replacement, Back Plate: passo 3, imagem 2 %32

    • Unscrew the two 9 mm Phillips #1 screws from the top and bottom.

    • Total: 2 x Screws

    Editar

  4. Brother PT-110 Printer Motor Replacement: passo 4, imagem 1 %32

    • First: To separate the top cover from the body, insert a spudger between the two halves.

    • Gently twist the spudger until the two halves separate. Do this in multiple spots around the perimeter of the cover to distribute the pressure.

    • DO NOT PULL HALVES APART. There are wired connections inside that must be disconnected before halves can be fully separated.

    Editar

  6. Brother PT-110 Printer Motor Replacement: passo 5, imagem 1 %32

    • Gently separate the two covers, ensuring wires are not taut.

    Editar

  7. Brother PT-110 Printer Motor Replacement: passo 6, imagem 1 %32

    • Gently grasp the ribbon wire and top cover, then gently pull the ribbon wire out of its connection.

    Editar

  8. Brother PT-110 Printer Motor Replacement: passo 7, imagem 1 %32 Brother PT-110 Printer Motor Replacement: passo 7, imagem 2 %32

    • Carefully pinch the top of the connector.

    • Pull perpendicular to the device until the wire is disconnected.

    • It may require more force than expected to disconnect the wires.

    Editar

  9. Brother PT-110 Printer Motor Replacement: passo 8, imagem 1 %32 Brother PT-110 Printer Motor Replacement: passo 8, imagem 2 %32 Brother PT-110 Printer Motor Replacement: passo 8, imagem 3 %32

    • Unscrew the three 9 mm Phillips #1 screws shown.

    • Total: 3 x Screws

    Editar

  10. Brother PT-110 Printer Motor Replacement, Printer Motor: passo 9, imagem 1 %32

    • Remove the motor housing.

    Editar

  11. Brother PT-110 Printer Motor Replacement: passo 10, imagem 1 %32 Brother PT-110 Printer Motor Replacement: passo 10, imagem 2 %32

    • Unscrew the two 3 mm Phillips #1 screws from the motor housing.

    • Total: 2 x Screws

    Editar

  12. Brother PT-110 Printer Motor Replacement: passo 11, imagem 1 %32

    • Remove the motor.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Kimberly Larsen

Membro desde: 09/28/16

237 Reputação

Autoria de 5 guias

Emblemas: 11

+8 outros emblemas

Equipe

IUPUI, Team 1-1, Harley Fall 2016 Membro de IUPUI, Team 1-1, Harley Fall 2016

IUPUI-HARLEY-F16S1G1

Membros da 3

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 7

Últimos 30 dias: 17

Duração total: 789