Ir para o conteúdo principal

Introdução

This guide will show how to remove and replace the power wire in a Brentwood TS-292B toaster.

  1. Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.
    • Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.

  2. To remove the toasting lever, pull the lever away from the toaster.
    • To remove the toasting lever, pull the lever away from the toaster.

  3. Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing.
    • Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing.

  4. Unscrew the wire bracket with a Phillips #2 screw driver.
    • Unscrew the wire bracket with a Phillips #2 screw driver.

  5. Pull back on the black tab that is holding the circuit board in place.
    • Pull back on the black tab that is holding the circuit board in place.

    • While pulling the tab back, lift up on the circuit board.

  6. Desolder the power wire connections on the circuit board.
    • Desolder the power wire connections on the circuit board.

    • Desolder in a well ventilated area.

    • The tip of soldering iron is hot handle with caution.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 91