Conserte seus objetos Comunidade Loja

Brentwood TS-292B Browning Dial Circuitboard Replacement

Introdução

This guide will show how to remove and replace the browning dial/circuit of the Brentwood TS-292B.

O que você precisa

  1. Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: passo 1, imagem 1 %32 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: passo 1, imagem 2 %32 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: passo 1, imagem 3 %32

    • Remove the five screws indicated using a Philips head screwdriver.

    Editar

  2. Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 2, imagem 1 %32 Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 2, imagem 2 %32

    • Pull hard on the browning lever until it detaches from the toaster.

    • It will take some force to pull it off.

    • Once the tab is off, lift up on the housing to remove it from the toaster.

    Editar

  4. Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 3, imagem 1 %32

    • Once the housing has been pulled upwards, carefully uplug the wire connecting the browning dial circuit board to the main circuit board.

    Editar

  5. Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 4, imagem 1 %32 Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 4, imagem 2 %32

    • There are four screws on the circuit board for the browning dial.

    • Unscrew each of them with a Philips head screwdriver to detach the board and remove the board and dial from the toaster housing.

    Editar

  6. Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 5, imagem 1 %32 Brentwood TS-292B Browning Dial Circuitboard Replacement: passo 5, imagem 2 %32

    • There are two holes on the board where the pin from the browning dial can align.

    • Refer to the images if you are having trouble finding them.

    • Replace the browning dial by inserting the pin on the dial into one of the holes indicated.

    • Replace the entire circuit board if need be.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 217