Ir para o conteúdo principal

Braun 5514 Motor Replacement

O que você precisa

  1. Braun 5514 Motor Replacement, Motor: passo 1, imagem 1 %32
    • Remove any attached trimmer heads by gripping and pulling away from the body.

  2. Braun 5514 Motor Replacement: passo 2, imagem 1 %32 Braun 5514 Motor Replacement: passo 2, imagem 2 %32 Braun 5514 Motor Replacement: passo 2, imagem 3 %32
    • Insert an opening pick between the top plate and the grey separator.

    • Slide the opening pick around the perimeter of the plate to release the hidden clips.

  3. Braun 5514 Motor Replacement: passo 3, imagem 1 %32
    • Remove the four 7mm Torx T6 screws attaching the grey plastic frame to the black plastic casing.

  4. Braun 5514 Motor Replacement: passo 4, imagem 1 %32 Braun 5514 Motor Replacement: passo 4, imagem 2 %32
    • Use the opening pick to lift the grey frame from the black casing.

  5. Braun 5514 Motor Replacement: passo 5, imagem 1 %32 Braun 5514 Motor Replacement: passo 5, imagem 2 %32
    • Remove the circuit board assembly from the frame.

  6. Braun 5514 Motor Replacement: passo 6, imagem 1 %32
    • Pull the small black plastic piece out of the frame.

  7. Braun 5514 Motor Replacement: passo 7, imagem 1 %32 Braun 5514 Motor Replacement: passo 7, imagem 2 %32
    • Desolder the wires attached to the motor.

    • Remember where the red and black wires attach in case the replacement motor doesn't have it labeled.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Andrew Kluckhuhn

Membro desde: 07/05/18

959 Reputação

Autoria de 2 guias

Equipe

IUPUI, Team S2-G2, Harley Summer 2018 Membro de IUPUI, Team S2-G2, Harley Summer 2018

IUPUI-HARLEY-SU18S2G2

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 8

Últimos 30 dias: 66

Duração total: 2,994