Conserte seus objetos Comunidade Loja

Bowers and Wilkins T7 Battery Replacement

Introdução

Use this guide to learn how to replace your battery for the Bowers and Wilkins T7 Bluetooth Speaker.

O que você precisa

  1. Bowers and Wilkins T7 Battery Replacement, Access Panel: passo 1, imagem 1 %32

    • As with all electronic devices, make sure your device is powered off before you begin.

    • Gently lift up the access panel; it should easily "pop" open.

    Editar

  2. Bowers and Wilkins T7 Battery Replacement: passo 2, imagem 1 %32

    • Remove 14mm screws on the front panel with a J1 Phillips head screwdriver.

    • There are 8 screws in total.

    Editar

  3. Bowers and Wilkins T7 Battery Replacement: passo 3, imagem 1 %32 Bowers and Wilkins T7 Battery Replacement: passo 3, imagem 2 %32

    • Be gentle, the rubber seal is fragile and easy to tear, resulting in cosmetic damage to your device.

    • Using the ifixit Opening Tool, carefully pry off the rubber seal around the sides.

    • The seal is held by adhesive, if this is proving difficult you can use a heat gun to help the process.

    Editar

  5. Bowers and Wilkins T7 Battery Replacement: passo 4, imagem 1 %32 Bowers and Wilkins T7 Battery Replacement: passo 4, imagem 2 %32

    • The cover is the most difficult part to remove. As you work, pry continuously, moving the tool around the device, working it a little further as you go.

    • Using the ifixit Opening Tool, pry open at the seam found under the rubber seal.

    • As the cover starts to come off, you can lift up using your hand.

    Editar

  6. Bowers and Wilkins T7 Battery Replacement: passo 5, imagem 1 %32 Bowers and Wilkins T7 Battery Replacement: passo 5, imagem 2 %32 Bowers and Wilkins T7 Battery Replacement: passo 5, imagem 3 %32

    • Gently squeeze the internal locking mechanism inside the red and white terminals with either your fingers or a pair of precision tweezers.

    • While squeezing the internal locking mechanism, pull back the terminal.

    • Repeat this process for the second speaker.

    Editar

  7. Bowers and Wilkins T7 Battery Replacement, Battery: passo 6, imagem 1 %32

    • Using a cutting tool such as a Jimmy steel blade or wire cutter, cut the cable tie surrounding the battery.

    • Be careful not to damage the battery while cutting the cable tie surrounding the battery.

    Editar

  8. Bowers and Wilkins T7 Battery Replacement: passo 7, imagem 1 %32 Bowers and Wilkins T7 Battery Replacement: passo 7, imagem 2 %32

    • Using the ifixit Opening Tool, pry out the battery power supply connector.

    • Pull and remove the battery power supply connector.

    Editar

  9. Bowers and Wilkins T7 Battery Replacement: passo 8, imagem 1 %32 Bowers and Wilkins T7 Battery Replacement: passo 8, imagem 2 %32

    • After disconnecting the power supply connector, pull the battery out of its case.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

Bertrand Plummer

Membro desde: 02/28/17

251 Reputação

Autoria de 1 guia

Emblemas: 6

+3 outros emblemas

Equipe

USF Tampa, Team S7-G1, Cagle Spring 2017 Membro de USF Tampa, Team S7-G1, Cagle Spring 2017

USFT-CAGLE-S17S7G1

Membros da 5

Autoria de 4 guias

3 comentários

Bravo ! Le choix de cet appareil symbolique !

Pierre Vanhoorenbeeck - Responder

Seriously

Couldn't the lady get her

'nails did’

Lux Valet - Responder

No repair any repairing sentar

Abdul Malik Parvez - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 18

Últimos 30 dias: 116

Duração total: 9,388