Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

The audio cable is easy to remove. This requires absolutely no repair skills.

  1. To start, make sure that the headphones are disconnected from any audio source.
    • To start, make sure that the headphones are disconnected from any audio source.

  2. Fold the earpads flat.
    • Fold the earpads flat.

  3. Pull off the earpad. When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.
    • Pull off the earpad.

    • When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

  4. Take the audio cable out of the clip.
    • Take the audio cable out of the clip.

  5. Pull out the audio cable.
    • Pull out the audio cable.

  6. Headphones remain.
    • Headphones remain.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Ashley Ryan

Membro desde: 25/03/2012

5.216 Reputação

3 Guias de autoria

Equipe

Master Techs Membro de Master Techs

Community

295 Membros

963 Guias de autoria

I replaced cable once and all was fine. Now left side only not working. Could it be something else or just time for a new cable?

Jayrosen - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 19

Últimos 30 dias: 80

Duração total: 6,892