Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

This guide will help you replace the IR receiver in your Bose speaker.

Peças

Nenhum componente especificado.

  1. Gently pry the front mesh cover off of the sound dock using a metal spudger. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.
    • Gently pry the front mesh cover off of the sound dock using a metal spudger.

    • The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.

  2. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  3. Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.
    • Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.

  4. Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.
    • Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Low

Membro desde: 14/04/2015

476 Reputação

4 Guias de autoria

Equipe

Cal Poly, Team 4-1, Maness Spring 2015 Membro de Cal Poly, Team 4-1, Maness Spring 2015

CPSU-MANESS-S15S4G1

4 Membros

5 Guias de autoria

Hi my sounddock blocked suddenly and the green led always on. Do you now something about please... :(

jose - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 14

Últimos 30 dias: 45

Duração total: 4,727