Ir para o conteúdo principal

Boosted Board 1st Generation Rear Wheels Replacement

O que você precisa

  1. Boosted Board 1st Generation Rear Wheels Replacement, Rear Wheels: passo 1, imagem 1 %32 Boosted Board 1st Generation Rear Wheels Replacement, Rear Wheels: passo 1, imagem 2 %32
    • Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench.

    • Do Not Remove the Screws.

  2. Boosted Board 1st Generation Rear Wheels Replacement: passo 2, imagem 1 %32
    • Compress the motor mount back towards the wheel.

    • While keeping the motor mount compressed, tighten one of the hex nuts that you loosened in the previous step.

    • The motor mounts are spring tensioned so it is necessary compress them to loosen the belts.

  3. Boosted Board 1st Generation Rear Wheels Replacement: passo 3, imagem 1 %32 Boosted Board 1st Generation Rear Wheels Replacement: passo 3, imagem 2 %32
    • Remove the axel nut with a 1/2" socket wrench

  4. Boosted Board 1st Generation Rear Wheels Replacement: passo 4, imagem 1 %32 Boosted Board 1st Generation Rear Wheels Replacement: passo 4, imagem 2 %32 Boosted Board 1st Generation Rear Wheels Replacement: passo 4, imagem 3 %32
    • Rotate and pull counterclockwise until the wheel comes off the axle completely.

    • The front washer will come off with the wheel.

    • Remove the back washer from the axle.

    • Replacing the wheel requires the bearings to be switched into the new wheel.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Emily Imfeld

Membro desde: 10/06/16

532 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 15-7, Livingston Fall 2016 Membro de Cal Poly, Team 15-7, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G7

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 9

Duração total: 1,265