Blackberry Curve 9300 Screen Replacement

Introdução

This guide was written to aid with Blackberry Curve screen replacement. Following the steps below should provide relatively simple means of achieving this goal.

O que você precisa

Passo 1 Battery

Blackberry Curve 9300 Screen Replacement, Battery: passo 1, imagem 1 %32

Place your Blackberry face down in front of you.

Editar

Passo 2

Locate the indent on the bottom of the back cover.
Use your fingernail to lift and remove the back cover.

Editar

Passo 3

From the top, use your fingernail to lift and remove the battery.

Editar

Passo 4 Keyboard

Blackberry Curve 9300 Screen Replacement, Keyboard: passo 4, imagem 1 %32

Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.

Editar

Passo 5

Place the phone face up and use tweezers to securely grip and lift the screen upwards.

Editar

Passo 6

Use a plastic opening tool to lift the bottom edge of the front cover.

Editar

Passo 7

Use your nails to unclip the sides of the frame from the phone.

Editar

Passo 8

Lift and remove the frame.

Editar

Passo 9

Lift and remove the keyboard.

Editar

Passo 10 Screen

Blackberry Curve 9300 Screen Replacement, Screen: passo 10, imagem 1 %32

Locate and remove the two 5mm screws on top of keyboard base using the T6 Torx screwdriver

Editar

Passo 11

Carefully pull the keyboard base up and away from the phone.
Disconnect the keyboard base from the phone completely.

Editar

Passo 12

Blackberry Curve 9300 Screen Replacement: passo 12, imagem 3 %32

Locate and remove the four 5mm screws on the top and bottom of the phone with a T6 Torx screwdriver

Editar

Passo 13

Use a plastic opening tool to find the crease below the screen.
Insert where shown and use the tool to unclip the two sides of screen from body.
The opening tool goes approximately midway between the top and bottom edge of the screen.