Conserte seus objetos Comunidade Loja

Blackberry Curve 8330 LCD Panel Replacement

O que você precisa

  1. Blackberry Curve 8330 LCD Panel Replacement, Remove Back Cover: passo 1, imagem 1 %32

    • We did not have an actual back cover or battery for the phone we were given. Therefore, the first couple of steps will be without pictures.

    • Hold the phone with the back side facing you.

    • Press down on the silver tab towards the bottom end of the phone.

    • Carefully lift up the back casing to reveal the battery.

    Editar

  2. Blackberry Curve 8330 LCD Panel Replacement, Remove Battery: passo 2, imagem 1 %32

    • Put your finger on the top left corner of the battery and lift the battery up and out of its housing.

    • The phone should now look like this.

    Editar

  3. Blackberry Curve 8330 LCD Panel Replacement, Keyboard: passo 3, imagem 1 %32

    • Remove the two top screws using a T5 Torx screwdriver.

    Editar

  4. Blackberry Curve 8330 LCD Panel Replacement: passo 4, imagem 1 %32 Blackberry Curve 8330 LCD Panel Replacement: passo 4, imagem 2 %32

    • Use a plastic opening tool to pry the edges of the bottom cover until it snaps loose.

    • The cover will now pull off easily.

    Editar

  6. Blackberry Curve 8330 LCD Panel Replacement: passo 5, imagem 1 %32 Blackberry Curve 8330 LCD Panel Replacement: passo 5, imagem 2 %32

    • Use a plastic opening tool to pry between the front and back cover.

    • Start prying from wherever it is easiest to separate the silver and black plastic of the covers.

    • There are 5 securing clips on the front panel to disconnect.

    • Pry gently to prevent breaking the plastic clips when removing the front panel.

    • Once all the clips have been freed, the front cover will lift away from the phone.

    Editar

  7. Blackberry Curve 8330 LCD Panel Replacement: passo 6, imagem 1 %32

    • Lift the flexible keypad away from the device. It should come off easily.

    Editar

  8. Blackberry Curve 8330 LCD Panel Replacement: passo 7, imagem 1 %32 Blackberry Curve 8330 LCD Panel Replacement: passo 7, imagem 2 %32

    • Use a T6 Torx Screwdriver to remove the four corner screws on the keyboard's housing.

    • Lift the keyboard frame away from the device.

    • There may be a small amount of adhesive at the bottom of the frame that needs to be pulled away.

    Editar

  9. Blackberry Curve 8330 LCD Panel Replacement, LCD Panel: passo 8, imagem 1 %32 Blackberry Curve 8330 LCD Panel Replacement, LCD Panel: passo 8, imagem 2 %32

    • Detach each side casing by pulling them off gently from the phone.

    Editar

  10. Blackberry Curve 8330 LCD Panel Replacement: passo 9, imagem 1 %32

    • Remove the back housing from the mother board.

    Editar

  11. Blackberry Curve 8330 LCD Panel Replacement: passo 10, imagem 1 %32

    • Unhook the screen frame from the small tab at the top of the motherboard.

    Editar

  12. Blackberry Curve 8330 LCD Panel Replacement: passo 11, imagem 1 %32 Blackberry Curve 8330 LCD Panel Replacement: passo 11, imagem 2 %32

    • Using a plastic opening tool, detach the connector on the LCD screen from the motherboard.

    • There may be some adhesive behind the LCD screen. If needed, pry the LCD screen away from the motherboard using the plastic opening tool.

    • Remove the LCD screen from the motherboard

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Joshua Ramos

Membro desde: 04/04/12

65 Reputação

Autoria de 2 guias

Emblemas: 7

+4 outros emblemas

Equipe

Cal Poly, Team 14-11, Forte Spring 2012 Membro de Cal Poly, Team 14-11, Forte Spring 2012

CPSU-FORTE-S12S14G11

Membros da 5

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,554