Ir para o conteúdo principal

Blackberry Curve 8330 Keyboard Replacement

O que você precisa

  1. Blackberry Curve 8330 Keyboard Replacement, Remove Back Cover: passo 1, imagem 1 %32
    • We did not have an actual back cover or battery for the phone we were given. Therefore, the first couple of steps will be without pictures.

    • Hold the phone with the back side facing you.

    • Press down on the silver tab towards the bottom end of the phone.

    • Carefully lift up the back casing to reveal the battery.

  2. Blackberry Curve 8330 Keyboard Replacement, Remove Battery: passo 2, imagem 1 %32
    • Put your finger on the top left corner of the battery and lift the battery up and out of its housing.

    • The phone should now look like this.

  3. Blackberry Curve 8330 Keyboard Replacement, Keyboard: passo 3, imagem 1 %32
    • Remove the two top screws using a T5 Torx screwdriver.

  4. Blackberry Curve 8330 Keyboard Replacement: passo 4, imagem 1 %32 Blackberry Curve 8330 Keyboard Replacement: passo 4, imagem 2 %32
    • Use a plastic opening tool to pry the edges of the bottom cover until it snaps loose.

    • The cover will now pull off easily.

  5. Blackberry Curve 8330 Keyboard Replacement: passo 5, imagem 1 %32 Blackberry Curve 8330 Keyboard Replacement: passo 5, imagem 2 %32
    • Use a plastic opening tool to pry between the front and back cover.

    • Start prying from wherever it is easiest to separate the silver and black plastic of the covers.

    • There are 5 securing clips on the front panel to disconnect.

    • Pry gently to prevent breaking the plastic clips when removing the front panel.

    • Once all the clips have been freed, the front cover will lift away from the phone.

  6. Blackberry Curve 8330 Keyboard Replacement: passo 6, imagem 1 %32
    • Lift the flexible keypad away from the device. It should come off easily.

  7. Blackberry Curve 8330 Keyboard Replacement: passo 7, imagem 1 %32 Blackberry Curve 8330 Keyboard Replacement: passo 7, imagem 2 %32
    • Use a T6 Torx Screwdriver to remove the four corner screws on the keyboard's housing.

    • Lift the keyboard frame away from the device.

    • There may be a small amount of adhesive at the bottom of the frame that needs to be pulled away.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nolan Reker

Membro desde: 04/04/12

30 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 14-11, Forte Spring 2012 Membro de Cal Poly, Team 14-11, Forte Spring 2012

CPSU-FORTE-S12S14G11

Membros da 5

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,827