Pular para o conteúdo principal

Introdução

The process of replacing the trackpad of your BlackBerry Bold 9900 will allow you to become familiar with your device and restore full functionality of the trackpad.

  1. Place phone screen down.
    • Place phone screen down.

    • Use your finger to life upward on the battery case.

    • Pull the cover away from the battery.

  2. Lift the edge of battery with the green stripe upward to remove battery.
    • Lift the edge of battery with the green stripe upward to remove battery.

  3. The SIM Card is located where the red rectangle is shown. To remove SIM Card, push the card inward towards the top of the phone then release. The SIM card will be ejected.
    • The SIM Card is located where the red rectangle is shown.

    • To remove SIM Card, push the card inward towards the top of the phone then release. The SIM card will be ejected.

  4. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  5. Lift the bezel at the bottom of the phone up and peel it away from the phone. Lift the bezel at the bottom of the phone up and peel it away from the phone.
    • Lift the bezel at the bottom of the phone up and peel it away from the phone.

  6. Remove the two exposed screws using the T5 Torx screwdriver. Remove the two exposed screws using the T5 Torx screwdriver.
    • Remove the two exposed screws using the T5 Torx screwdriver.

  7. Now lever the keyboard up using the screwdriver in the indicated hole.
    • Now lever the keyboard up using the screwdriver in the indicated hole.

  8. The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard. The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.
    • The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

  9. Push into the trackpad. This will release the trackpad supporting piece. Push into the trackpad. This will release the trackpad supporting piece. Push into the trackpad. This will release the trackpad supporting piece.
    • Push into the trackpad. This will release the trackpad supporting piece.

  10. The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad. The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.
    • The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Chris Velasquez

Membro desde: 30-01-2018

193 reputação

2 Guias de autoria

Equipe

Baylor, Team S1-G4, Johnson Spring 2018 Membro de Baylor, Team S1-G4, Johnson Spring 2018

BU-JOHNSON-S18S1G4

3 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 13

Todo: 331